A new flat roof finished in Firestone EPDM rubber
For this project, a new flat roof was fitted and covered with Firestone EPDM rubber. The photographs show the roof at two key stages: the timber deck before the covering went on, and the completed rubber surface with black perimeter trims.
- The project
- New flat roof
- Roof covering
- Firestone EPDM rubber
- The finish
- Black perimeter trims
From timber deck to rubber covering
These two views document the roofing work on a building that was still under construction. The finished roof covering is shown separately from the unfinished walls below.
1. The prepared roof deck
The timber deck forms the flat roof surface before the rubber membrane is fitted. The roof shape and perimeter are clearly visible at this stage.
2. The EPDM finish
The roof is covered with Firestone EPDM rubber, with black trims defining the perimeter. This photograph shows the finished roofing work.
Select any photograph to see the full image.
A neatly finished flat roof
The change from the bare timber deck to the dark rubber covering is clear in the photographs. Black edge trims give the roof a defined perimeter above the building below.
- New flat roof fitted
- Timber deck shown before covering
- Firestone EPDM rubber installed
- Black perimeter trims fitted
Planning a roofing project?
Tell Garage Roofs Specialists about your roof and the work you have in mind. Get in touch for a free quote.